Brocade Communications Systems MLX Series Hardware Installation Manual page 43

http://www.brocade.com/downloads/documents/data_sheets/product_data_sheets/optics-famil
y-ds.pdf
Power supply requirements for BR-MLX-1GFx24-X and BR-MLX-1GFx24-X-ML interface modules
For power supply requirements for BR-MLX-1GFx24 and BR-MLX-1GFx24-X ML (24-port 1 Gbps)
fiber interface modules, refer to
20-port 100/1000 Ethernet interface module
Figure 20
FIGURE 20
The front panel includes the following features:
•
•
Table 12
TABLE 12
Position
Below each Ethernet port.
(Left-side LED supports port in
top row. Right-side LED supports
port in bottom row.)
100/1000 Ethernet ports
The 100/1000 Ethernet interface module contains 20 physical ports, through which you can
connect your router to other network routers at a speed of 100 Mbps or 1 Gbps.
You must insert an SFP-compliant fiber-optic transceiver (provided by Brocade) into a physical port.
SFP-compliant fiber-optic transceivers provide a physical medium-dependent (PMD) fiber interface
that can be used with either the LAN physical layer (PHY) or WAN physical layer (WAN PHY).
For a list of SFP optics supported by Brocade, refer to the latest version of the Brocade Optics
Family Data Sheet, available online in the following location:
http://www.brocade.com/downloads/documents/data_sheets/product_data_sheets/optics-famil
y-ds.pdf
20-port 10/100/1000 Ethernet interface module
Figure 21
FIGURE 21
Brocade MLX Series and NetIron XMR Hardware Installation Guide
53-1003821-01
shows the front panel of the 20-port 100/1000 Gbps Ethernet SFP interface module.
20-port 100/1000 Ethernet module front panel
LEDs to the left support the top ports, LEDs to the right support the bottom ports
20 100/1000 Ethernet SFP ports
describes the LEDs for the 20-port 100/1000 Ethernet module
20-port 100/1000 Ethernet module LEDs
shows the front panel of the 20-port 10/100/1000 Ethernet RJ45 module.
20-port 10/100/1000 copper Ethernet interface module front panel
Chapter 8, "Hardware Specifications".
State Meaning
On or blinking The port is transmitting and receiving packets.
Off for an extended period The port is not transmitting or receiving packets.
1
Router modules
27