Brocade Communications Systems MLX Series Hardware Installation Manual page 99

1
2
DANGER
If the installation requires a different power cord than the one supplied with the device, make
sure you use a power cord displaying the mark of the safety agency that defines the regulations
for power cords in your country. The mark is your assurance that the power cord can be used
safely with the device.
4. For information about powering on the system, refer to
Brocade MLX Series and NetIron XMR Hardware Installation Guide
53-1003821-01
Rear lift handle 3
Cord retainer 4
page 123.
Installing a Brocade MLX-16 router
Power cord 5
Ground point
Side lift handles
"Activating the power source"
2
on
83