Brocade Communications Systems MLX Series Hardware Installation Manual page 197

1
2
2. Route cables from slots #3 and #4 up through comb A. Refer to
3. Route cables from slots #5 and #6 up through comb B.
4. Route cables from slots #7 and #8 up through comb C.
Cable routing for the upper-right quadrant
Route cables from slots in numerical order starting with the cables for slot #15.
1. Route cables from slots #15 and #16 directly to the right through the side comb. Refer to
FIGURE 123
Brocade MLX Series and NetIron XMR Hardware Installation Guide
53-1003821-01
1
2
3
4
Upper left quadrant
Comb C (slot #7 and #8 cables)
Figure 123.
Routing Upper-right quadrant cables to the right
Installing a NetIron XMR 32000 router
3 Comb B (slot #5 and #6 cables)
4 Comb A (slot #3 and #4 cables)
Figure
3
122.
181