Brocade Communications Systems MLX Series Hardware Installation Manual page 113

Slide chassis onto the saddle
1
2
FIGURE 66
1
2
4. Use the provided standard #12-24, #10-32 or M6 pan head screws (dependent on the
Brocade MLX Series and NetIron XMR Hardware Installation Guide
53-1003821-01
Front (port side) of rack mounting post
Rear side of rack mounting post
Slide the device into the rack
Align bottom of router slightly above the seat of the saddle using mechanical lift.
Using at least two people, slide router gently onto saddle and into the rack.
specifications of your rack) in each available hole on the rack mount bracket to attach the
router to the rack mounting poles. See
Installing a Brocade MLX-32 router
Figure 67.
2
97