Brocade Communications Systems MLX Series Hardware Installation Manual page 37

Power supply requirements for Gen-1 2-port or 4-port 10 Gbps Ethernet interface modules
For power supply requirements for Gen-1, 2-port or 4-port 10 Gbps Ethernet interface modules,
refer to
Gen-1.1 4-port 10 Gbps Ethernet interface modules
Gen-1.1 4-port 10 Gbps Ethernet interface modules are available in the following formats:
•
•
NOTE
The 10Gx4-X10 GbE module requires a minimum software version of R05.1.00. Please upgrade all
software on the system to a minimum of R05.1.00 before installing your 10Gx4-X module.
Figure 15
FIGURE 15
The front panel of the BR-MLX-10GX4-X and BR-MLX-10Gx4-X-ML modules includes the following
features:
•
•
BR-MLX-10GX4-X and BR-MLX-10Gx4-X-ML interface module LEDs
The BR-MLX-10GX4-X and BR-MLX-10Gx4-X-ML interface module LEDs indicate the status of each
port, as described in
TABLE 8
LED
Link
Active
BR-MLX-10GX4-X and BR-MLX-10Gx4-X-ML interface module Ethernet ports
The BR-MLX-10GX4-X interface module has four physical ports that allow you to connect your router
to other network routers at a speed of 10 Gbps. BR-MLX-10Gx4-X-ML supports up to 512K IPv4
routes in hardware. BR-MLX-10Gx4-X supports up to 1M IPv4 routes. BR-MLX-10Gx4-X-ML can be
upgraded to an X version through a software license. Please contact Brocade to purchase the
license upgrade.
Brocade MLX Series and NetIron XMR Hardware Installation Guide
53-1003821-01
Chapter 8, "Hardware
BR-MLX-10Gx4-X-ML - 4-port interface module for MLX, MLXe, and XMR devices
BR-MLX-10Gx4-X - 4-port interface module for MLX, MLXe, and XMR devices licensed for 1
million routes
shows the front panel of 4-port 10 Gbps Ethernet interface modules.
BR-MLX-10Gx4-X and BR-MLX-10Gx4-X-ML interface module front panel
Two LEDs per port
Four 10 Gbps Ethernet XFP optics ports
Table 8.
BR-MLX-10GX4-X and BR-MLX-10Gx4-X-ML Ethernet module LEDs
Location
Left of each
Ethernet port
Left of each
Ethernet port
Specifications".
State Meaning
On A link is established with the remote port.
Off A link is not established with the remote port.
On The port is transmitting and receiving packets.
Off The port is not transmitting or receiving packets.
1
Router modules
21