Brocade Communications Systems MLX Series Hardware Installation Manual page 299

1 Latch release
FIGURE 161
3. Insert the new fan assembly into the fan slot and push the enclosure in until the faceplate is
4. Tighten the four captive screws to secure the fan to the router.
5. Access the CLI, and enter the show chassis command to verify that the fans are operating
Brocade MLX Series and NetIron XMR Hardware Installation Guide
53-1003821-01
2 Fan tray assembly
Replacing the fan assembly in a Brocade MLXe 8-slot router
flush with the router. Pushing the enclosure in seats the fan connector with the router
connector.
normally.
Replacing fan assemblies
7
283