Brocade Communications Systems MLX Series Hardware Installation Manual page 201

1
2
2. Route cables from slots #20 and #19 down through comb A. Refer to
3. Route cables from slots #22 and #21 down through comb B.
4. Route cables from slots #24 and #23 down through comb C.
Cable routing for the lower-right quadrant
1. Route cables from slots #32 and #31 directly to the right through the side comb. Refer to
FIGURE 127
Brocade MLX Series and NetIron XMR Hardware Installation Guide
53-1003821-01
1
2
3
4
Lower left quadrant
Comb A (slot #19 and #20 cables)
Figure 127.
Routing the lower-right quadrant cables
Installing a NetIron XMR 32000 router
3 Comb B (slot #21 and #22 cables)
4 Comb C (slot #23 and #24 cables)
3
Figure 126.
185