Mrj21 Procedures; Cable Cinch With Two Mrj21 Cables; Cable Cinch With Three Mrj21 Cables - Brocade Communications Systems MLX Series Hardware Installation Manual

4

mRJ21 procedures

mRJ21 procedures
The following procedure demonstrates securing up to eight mRJ21 cables into the cable cinch.
When securing fewer than the maximum cables, follow the procedure to secure the desired
number of cables and simply wrap the remaining Velcro strap around the cable cinch. Use the
additional slots in the clip to secure groups of cables as required.

Cable cinch with two mRJ21 cables

To secure two mRJ21 cables, place the Velcro strap through slot one and use the front and rear left
recesses as shown in
FIGURE 137
T

Cable cinch with three mRJ21 cables

Three mRJ21 cables may be secured as shown in
FIGURE 138
204
Figure 137.
Two mRJ21 cables
Three mRJ21 cables
Figure 138.
Brocade MLX Series and NetIron XMR Hardware Installation Guide
53-1003821-01