Brocade Communications Systems MLX Series Hardware Installation Manual page 294

7
Replacing fan assemblies
1
2
3
4
5
4. Insert the new fan assembly into the fan slot and push the assembly in until the faceplate is
5. Secure the fan assembly to the router by replacing and tightening the four screws (on the
278
Fan module 1 6
Fan module 2 7
Fan module 3 8
Fan module 4 9
Fan module 5 10 Fan module 10
flush with the router. Pushing the fan assembly in seats the fan connector in the router
connector.
upper eight fan assemblies) and the two screws (on the lower two fan assemblies).
Fan module 6
Fan module 7
Fan module 8
Fan module 9
Brocade MLX Series and NetIron XMR Hardware Installation Guide
53-1003821-01