Setting Position, Size, And Masking; Output Resolution - IDK MSD-702UHD User Manual

4k@60 and hdcp 2.2 supported digital multi switcher
Hide thumbs Also See for MSD-702UHD:
Table of Contents

Advertisement

9.4

Setting position, size, and masking

Position, size, and masking attributes can be set for both the input ports and output ports of the MSD.
Normally, it is preferable to set them for the input ports. If edges are cut off due to enlarged display area by
the sink device side or if it is desired to modify the displayed area for all inputs at once, set the desired
attributes for the output ports.

9.4.1 Output resolution

Menu
Top→OUTPUT TIMING→RESOLUTION
Setting for
Each output channel (Common to OUTA / OUTB)
Setting values
・AUTO-A [Default]
・AUTO-B
・2160p@60(4096) (4096x2160) ・720p@60
・2160p@50(4096) (4096x2160) ・720p@59.94
・2160p@30(4096) (4096x2160) ・720p@50
・2160p@25(4096) (4096x2160) ・576p@50
・2160p@24(4096) (4096x2160) ・576i@50
・2160p@60
(3840x2160) ・480p@59.94
・2160p@50
(3840x2160) ・480i@59.94
・2160p@30
(3840x2160) ・WQXGA@60
・2160p@25
(3840x2160) ・WQHD@60
・2160p@24
(3840x2160) ・QWXGA@60
・1080p@60
(1920x1080) ・WUXGA@60
・1080p@59.94
(1920x1080) ・VESAHD@60
・1080p@50
(1920x1080) ・WSXGA+@60
・1080i@60
(1920x1080) ・UXGA@60
Normally, the optimal resolution will be selected automatically if you set this menu to "AUTO".
Numbers following "@" represent the vertical synchronous frequency.
480i / 480p / 576i / 576p / 720p / 1080i / 1080p / 2160p are timing formats relating to the CEA-861E standard.
Others are timing formats meeting either the VESA DMT standard or the VESA CVT standard. VESAHD@60,
WUXGA@60, QWXGA@60, WQHD@60, and WQXGA@60 are output formats that incorporate Reduced
Blanking.
The maximum format of OUTB (HDBaseT output connector) is 2160p@30. If 2160p@50 or 2160p@60 is
selected, video signals cannot be output from OUTB.
If "AUTO-A" or "AUTO-B" is selected, the maximum output resolution format is set to 2160p@30 automatically.
If you want to output video at 2160p@50 or 2160p@60 from OUTA (HDMI output connector), change the
setting to 2160p@50 or 2160p@60. In this case, video cannot be output from OUTB (HDBaseT output
connector).
MSD-701UHD / 702UHD / 801UHD/ 802UHD User's Guide
・1080i@59.94
(1920x1080) ・WXGA++@60
・1080i@50
(1920x1080) ・WXGA+@60
(1280x720)
(1280x720)
(1280x720)
(720x576)
(720x576)
(720x480)
(720x480)
(2560x1600) ・XGA@60
(2560x1440) ・SVGA@60
(2048x1152) ・VGA@60
(1920x1200)
(1920x1080)
(1680x1050)
(1600x1200)
(1600x900)
(1440x900)
・SXGA+@60
(1400x1050)
・WXGA@60
(1366x768)
・WXGA@60
(1360x768)
・SXGA@60
(1280x1024)
・Quad-VGA@60
(1280x960)
・WXGA@60
(1280x800)
・WXGA@60
(1280x768)
(1024x768)
(800x600)
(640x480)
47

Advertisement

Table of Contents
loading

This manual is also suitable for:

Msd-701uhdMsd-802uhdMsd-801uhd

Table of Contents