MSD-62 Series User's Guide
9.9.5 Window transaction effect
Menu
Top→OUTPUT SETTING→VIDEO SWITCHING
Setting for
Each output channel
Setting value
・FREEZE→FADE OUT-IN
・FADE OUT-IN
・CUT
You can select a window transition effect for when the video inputs is switched.
If "9.7.4 Automatic detection of video input interruption" is set to "ON" and input signal is disconnected,
this setting will be applied.
Note:
In "video combination" mode, "WIPE" cannot be selected. If "WIPE" is already selected, the setting will be
initialized to "FREEZE→FADE OUT-IN".
9.9.6 Window transaction speed
Menu
Top→OUTPUT SETTING→SWITCHING SPEED
Setting for
Each output channel
Setting value 100ms to 2000ms (per 10ms) [Default] 350ms
You can set the window transition speed for FADE OUT/IN or WIPE OUT/IN when the input channel is
switched.
The setting will be applied also when "9.7.4 Automatic detection of video input interruption" is set to "ON".
9.9.7 Wipe color
Menu
Top→OUTPUT SETTING→WIPE COLOR
Setting for
Each output channel
Setting value R / G / B:0 to 255 [Default] R / G / B: 0 (black)
You can set the wipe color.
If you set "LINK" to "ON", you can set only Red (R). Settings of Green (G) and Blue (B) will also be changed
according to the settings of the Red (R).
92
・BOTTOM→TOP WIPE
[Default]
・TOP→BOTTOM WIPE
・RIGHT→LEFT WIPE
・LEFT→RIGHT WIPE