MSD-701UHD / 702UHD / 801UHD/ 802UHD User's Guide
9.8.14
Masking time after automatic switching of input channel
Menu
Top→OUTPUT SETTING→AUTO SWITCHING MASK
Setting for
Each output channel (Common to OUTA / OUTB)
Setting value 0s000ms to 999s999ms [Default] 0s000ms
You can set the time from when input channel is switched automatically until when the next automatic
switching is performed. The automatic switching is not performed during the set time.
9.8.15
Channel switching mode of automatic switching
Menu
Top→OUTPUT SETTING→AUTO SWITCHING MODE
Setting for
Each output channel (Common to OUTA / OUTB)
Setting value V&A (Video & Audio) [Default], VIDEO (Video), AUDIO (Audio)
You can set the channel switching mode when automatic switching is executed for when the input channel is
switched automatically. This setting has priority regardless of setting of "8.2 Switching input channel".
9.8.16
HDBaseT output long reach mode
Menu
Top→OUTPUT SETTING→LONG REACH MODE
Setting for
Each output channel (only OUTB)
Setting value
・OFF : Long reach mode OFF Up to 328 ft. (100 m) [Default]
・ON : Long reach mode ON
You can enable / disable HDBaseT output long reach mode.
In long reach mode, up to 1080p (24 bit)/ dot clock 148 MHz is supported when using with IDK's HDbaseT
product. Select a supported output format.
76
【See: 9.8.13 Priority of input channel automatic switching】
【See: 9.8.13 Priority of input channel automatic switching】
Up to 492 ft. (150 m) .
【See: 9.4.1 Output resolution】
【See: 9.8.10 Deep Color】