Ignoring Duration After Automatic Switching; Channel Switching Mode Of Automatic Switching; Hdbaset Output Long Reach Mode - IDK MSD-6203 User Manual

MSD-62 Series User's Guide

9.9.15 Ignoring duration after automatic switching

Menu Top→OUTPUT SETTING→AUTO SWITCHING MASK
Setting for Each output channel
Setting value 0s000ms to 999s999ms [Default]0s000ms
You can set the time from when input channel is switched automatically until when the next automatic
switching is performed. The automatic switching is not performed during the set time.

9.9.16 Channel switching mode of automatic switching

Menu Top→OUTPUT SETTING→AUTO SWITCHING MODE
Setting for Each output channel
Setting value V&A (Video & Audio) [Default], VIDEO (Video), AUDIO (Audio)
You can set the channel switching mode when automatic switching is executed. This setting has priority
regardless of setting of "8.2 Selecting input channels".

9.9.17 HDBaseT output long reach mode

Menu Top→OUTPUT SETTING→LONG REACH MODE
Setting for HDBaseT output channel
Setting value ON : Long reach mode ON
OFF : Long reach mode OFF Up to 328 ft. (100 m) [Default]
You can enable / disable HDBaseT output long reach mode.
Long reach mode: Up to 1080p (24 bit)/ dot clock 148 MHz is supported when using with IDK's HDbaseT
product. Select a supported output format.
98
【See: 9.9.14 Priority of input channel automatic switching】
【See: 9.9.14 Priority of input channel automatic switching】
Up to 492 ft. (150 m)
【See: 9.4.1 Output resolution】
【See: 9.9.11 Deep Color】