Bitmap - IDK MSD-701UHD Command Reference Manual

@GMU / @SMU
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description Getting settings for startup.
Setting Command
example Response
Description Setting startup channel settings to crosspoint memory 3.
Remarks

3.3.14 Bitmap

@GBM / @SBM
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description Getting the output image.
Setting Command
example Response
Description Outputting bitmap 1 image to OUT 1.
Remarks
MSD-701UHD / 702UHD / 801UHD/ 802UHD Command Guide
Startup settings
@GMU
@GMU, state
@SMU, state
@SMU, state
state: Startup settings
1 to 9 = Crosspoint memory 1 to 9,
11 = Last channel [Default],
@GMU
@GMU,3
Channel settings of crosspoint memory 3.
@SMU,3
@SMU,3
－
Outputting bitmap image
@GBM
@GBM, out_1, out_2
@SBM, ch_1, out_1 (, ch_2, out_2)
@SBM, ch_1, out_1 (, ch_2, out_2)
out_1-2: Outputting bitmap image
0 = OFF [Default],
2 = Bitmap 2 ON,
4 = Bitmap 4 ON
Only registered numbers can be specified.
ch_1-2: Output channel
0 = All outputs, 1 = OUT1, 2 = OUT2
@GBM
@GBM,1,0
OUT1: bitmap 1, OUT2: not output a bitmap image.
@SBM,1,1
@SBM,1,1
－
10 = Channel OFF,
12 to 19 = Preset memory 1 to 8
1 = Bitmap 1 ON,
3 = Bitmap 3 ON,
101