Controlling Power Supply Of Sink Device; Setting And Canceling Key Lock - IDK MSD-501 User Manual

6.3.1 Controlling power supply of sink device

You can register the control command to turn on/off the sink device. Press the key to send the control
command to the sink device.
DISPLAY
POWER
1
2
[Fig. 6.3] Sink device power supply key
Note: If the reply command from the sink device is not checked, the actual power status of the sink device
and the LED may not match.

6.3.2 Setting and canceling key lock

Press and hold the "ESC" key for 5 seconds or longer to set/cancel key lock for keys below. You will hear a
long beep sound and then the following message is displayed for 1 second.
 "KEY LOCK !"
 "KEY LOCK RELEASE !"
DIGITAL MULTI SWITCHER
POWER
ON
OFF
IN 1 IN 2
DISPLAY POWER keys
DISPLAY DISPLAY
IN 1 IN 1
POWER POWER
1
2
[Fig. 6.4] Keys to be set/cancel key lock (MSD-702)
Sink device
Turned ON
Turned OFF
Input channel selection keys
IN 2 IN 2 IN 3 IN 3 IN 4 IN 4 IN 5 IN 5 IN 6 IN 6
MSD-501/502/701/702 User's Guide
【See: 7.13.3 Command link】
LED
Lights (orange)
Turned off
【See: 7.17.1 Key lock mode】
Menu operation keys
IN 7 IN 7 OFF OFF
MENU / SET
OUT 1
ESC ESC
OUT 2
ESC key: use this key
MSD-702
IN 1
HDMI/DVI
25