Startup Settings [Startup] - IDK msd-804fd User Manual

7.13.6 Startup settings [STARTUP]

･Cross point memories: CROSS POINT1 to 8
Starts up with the channel settings saved in the selected cross point memory. For settings other
than channel settings, starts up with the settings of the last MSD power off.
･CHANNEL OFF
Channel setting will be OFF. For settings other than channel setting, starts up with the settings of
the last MSD power off.
･LAST CHANNEL [Default]
Starts up with the settings of the last MSD power off.
･Preset memory: PRESET MEMORY 1 to 8
Starts up with the settings saved in the preset memory. For settings that are not saved in the
preset memory, it starts up with the settings of the last MSD power off. (For settings that can be
saved in the preset memory, see "7.13.5 Saving all settings [SAVE ALL SETTING]".)
1. To set the startup setting using menu:
MSD-804FD
↓ SET key
[FUNCTION SELECT]
PRESET MEMORY
↓ SET key
[PRESET MEMORY]
STARTUP
↓ SET key
[STARTUP]
LAST CHANNEL
↓ ESC key: Returns to the previous screen.
* You cannot select a preset memory whose settings are not saved. Nothing is saved in all preset memories
by factory default.
2. To set the startup setting using commands:
@SMU: Set startup status
@GMU: Get startup status
Top
▲▼keys: Select "PRESET MEMORY".
▲▼keys: Select "STARTUP".
▲▼keys: Select the setting for startup (CROSS POINT 1 to 8,
CHANNEL OFF, LAST CHANNEL, PRESET MEMORY 1 to 8).
185
MSD-804FD User's Guide
*