Hdcp Re-Authentication; Priority Of Input Channel Automatic Switching - IDK MSD-72 Series User Manual

4k@60 and hdcp 2.2 supported digital multi switcher
Hide thumbs Also See for MSD-72 Series:
Table of Contents

Advertisement

9.7.11 HDCP re-authentication

Top → OUTPUT SETTING → HDCP AUTHENTICATION
Menu
Setting for
Each output channel
If a sink device supporting HDCP is connected, HDCP is authorized automatically. You can re-authorize
HDCP manually using this menu (connection Reset is performed automatically, but it can be performed
manually using this menu). Press the MENU/SET key to perform the re-authentication.

9.7.12 Priority of input channel automatic switching

Top → OUTPUT SETTING → AUTO SWITCHING ON / AUTO SWITCHING OFF
Menu
Setting for
Each output channel
Setting value [Table 9.8] Setting of priority of input channel automatic switching
[Table 9.8] Setting of priority of input channel automatic switching
Output channel (OUT)
Input channel (IN)
Priority (PRI)
■ AUTO SWITCHING ON
AUTO SWITCHING ON menu switches input signal when the input signal changes from "OFF" to "ON".
The MSD switches input signal automatically based on following conditions:
・When the input signal become from "OFF" to "ON", and that input channel has higher priority that current
channel or same priority level.
・When the input signal become from "OFF" to "ON", and other input channels, that have higher priority than
the input signal, do not have input signal.
Input signal "ON"
Input signal "OFF"→"ON"
IN 1
IN 2
IN 3
IN 4
PRI 1
PRI 2
PRI 3
PRI 4
PRI 5
PRI 7
PRI 6
PRI 5
PRI 4
PRI 3
PRI * ・・・Priority for each input channel
[Figure 9.16] Input channel automaic switching "OFF" to "ON"
Item
*Setting each input channel priority to each output channel
Input signal "ON"
IN 5
IN 6
IN 7
IN 8
IN 9
OFF
OFF
OFF
PRI 6
PRI 7
PRI 2
PRI 1
OFF
OFF
Set value
1 to 4
1 to 9
1 (high) to 9 (low), OFF
IN4 has lower priority than IN1.
Input automatic switching will not
be executed.
IN 1
IN 2
IN 3
PRI 1
PRI 2
PRI 3
OUT 1
PRI 7
PRI 6
PRI 5
OUT 2
77
MSD-72 Series User's Guide
Default
-*
-*
OFF
IN4 has higher priority than IN1.
Input channel automatic switching
will be executed.
IN 4
IN 5
IN 6
IN 7
IN 8
OFF
PRI 4
PRI 5
PRI 6
PRI 7
PRI 4
PRI 3
PRI 2
PRI 1
OFF
IN 9
OFF
OFF
OUT 1
OFF
OUT 2

Advertisement

Table of Contents
loading

Table of Contents