Figure 3-2 Sun Storedge 5210 Nas Network Interface Card Ports - Sun Microsystems StorEdge 5210 NAS Hardware Installation

Hide thumbs Also See for StorEdge 5210 NAS:
Table of Contents

Advertisement

Built-in Network Interface Card (NIC) Ports
The two built-in NIC ports enable communication between the network host server
and the Sun StorEdge 5210 NAS. The Sun StorEdge 5210 NAS supports three
network types: Ethernet, Fast Ethernet and Gigabit. An Optical Gigabit card is also
available.
Built-in NIC Ports
Sun StorEdge 5210 NAS Network Interface Card Ports
FIGURE 3-2
Power Supplies
A system's power supply provides power to all of its components. Power supply
systems for both the Sun StorEdge 5210 NAS servers and the expansion unit are
auto-sensing devices.
The power supply system in the Sun StorEdge 5210 NAS consists of two (2)
redundant hot-swappable modules in a 1 + 1 configuration. Each module is capable
of maintaining a load of 500 watts. A minimum of one supply is required for proper
system operation, although two supplies are required to affect redundant power
supply.
A red light on the rear of the power supply module indicates that the power cord is
disconnected.
Chapter 3 Using the Sun StorEdge 5210 NAS
29

Advertisement

Table of Contents
loading

Table of Contents