Interface Menu
Control Mode
The Interface Menu allows you to put the tape library into various modes from
which you can control the tape library.
The Interface Menu consists of the following submenus:
•
Control mode
•
Configure 25-Pin Port (not supported)
•
Configure 9-Pin Port (not supported)
•
Configure 4-Pin Port (not supported)
The Control Mode Menu determines what controls the motions of the CHM.
The SPARCstorage Library must be in one of the three sequential modes in
order to use the SunDiag
control modes:
•
LCD Interface
•
SCSI Interface
•
Sequential 1
•
Sequential 2
•
Dual Sequential
•
25-Pin Serial Port (not supported)
•
9-Pin Serial Port (not supported)
•
4-Pin Serial Port (not supported)
↑
Use
to scroll up through the control mode functions and
SPARCstorage Library Menu Functions
™
system exerciser. The tape library has the following
4
↓
to scroll down.
4-3