Pilz PMCprotego D.48 Operating Manual page 52

Function Description
Configura-
tion
Two en-
coders
(external
control)
Three en-
coders
(position
and control
external)
A detailed description of the parameters is available in the commissioning software's online
help.
The PMCprotego D supports all standard encoder types.
The table below provides an overview of the supported encoder types and their corres-
ponding parameters and connectors.
Feedback types with one-cable connection (power and feedback in one cable)
Operating Manual PMCprotego D.48, PMCprotego D.72
1001735-EN-04
Location Parameter
In the mo- FBTYPE
tor
External GEARMODE
In the mo- FBTYPE
tor
External EXTPOS
External GEARMODE
NOTICE
Select the correct encoder (FBTYPE) in the commissioning software
tool
In the commissioning software tool PASmotion you must select the correct
encoder (FBTYPE). Selecting the wrong encoder can lead to the destruction
of the connected encoder (caused by the wrong supply voltage).
Hiperface DSL
Commut- Speed reg-
ation ulator
x x
x x
Hybrid cable
Position
Electronic
control-
ler Gearing
x
x
x
x
52