Pilz PMCprotego D.48 Operating Manual page 186

Commissioning
Configuration Example
Components
}
PMCprotego D
}
Motor PMCtendo SZxx with standard encoder
}
Mains contactor K1 (optional)
}
24 VDC power supply for control element
} 24 V power supply for motor holding brake
}
Motor and encoder cable
}
Brake resistor R
}
PC with installed commissioning software PASmotion. The current version is available
on our website www.pilz.com.
Operating Manual PMCprotego D.48, PMCprotego D.72
1001735-EN-04
INFORMATION
Recommendation: Note the sequence when switching on and switch-
ing off
Please note the correct order when switching on and switching off the servo
amplifier. Further information is provided in Chapter Normal mode.
Be
186