Warranty And Liability - Pilz PMCprotego D.48 Operating Manual

Safety
A competent person is a qualified and knowledgeable person who, because of their train-
ing, experience and current professional activity, has the specialist knowledge required. To
be able to inspect, assess and operate devices, systems and machines, the person has to
be informed of the state of the art and the applicable national, European and international
laws, directives and standards.
It is the company's responsibility only to employ personnel who
} Are familiar with the basic regulations concerning health and safety / accident preven-
tion,
} Have read and understood the information provided in the section entitled Safety
}
Have a good knowledge of the generic and specialist standards applicable to the spe-
cific application.
3.1.7

Warranty and liability

All claims to warranty and liability will be rendered invalid if
}
The product was used contrary to the purpose for which it is intended,
}
Damage can be attributed to not having followed the guidelines in the manual,
} Operating personnel are not suitably qualified,
}
Any type of modification has been made (e.g. exchanging components on the PCB
boards, soldering work etc.).
3.1.8 Disposal
}
In safety-related applications, please comply with the mission time T
lated characteristic data.
}
When decommissioning, please comply with local regulations regarding the disposal of
electronic devices (e.g. Electrical and Electronic Equipment Act).
3.2 Safety during operation
Operating Manual PMCprotego D.48, PMCprotego D.72
1001735-EN-04
DANGER!
While the devices are in operation there is a risk of death or serious in-
jury and material damage.
- Do not open or touch the devices during operation.
- Keep all covers and cabinet doors closed during operation.
- When the devices are switched on, they should only be touched during
commissioning by qualified staff.
- During operation the servo amplifiers may contain live, uninsulated com-
ponents, depending on their protection type.
- Control and power connections may still carry voltage, even when the mo-
tor is not rotating.
- Surfaces on the servo amplifiers may become hot during operation. Tem-
peratures may reach more than 80° C.
in the safety-re-
M
23