Expansion Card I/O-14/08 - Pilz PMCprotego D.48 Operating Manual

Wiring
6.8.2

Expansion card I/O-14/08

Under "Connection cables", please note the requirements for the:
} Cable cross sections
}
Insulation material
The assignment of the inputs and outputs in the tables below is the default setting ("Con-
nector pin assignment" table, under "Designation"). It can be changed at any time in the
commissioning software (see chapter entitled "Function Description" for details of the ex-
pansion card).
Connector X11A
Connector pin assignment
Connector X11B
Operating Manual PMCprotego D.48, PMCprotego D.72
1001735-EN-04
Pin Designation
1 A0
2 A1
3 A2
4 A3
5 A4
6 A5
7 A6
8 A7
9 Reference
10 S_fehl_clear
11 FStart_Folge
12 FStart_Tipp x
Pin Designation
1 FRestart
2 FStart_I/O
3 InPosition
4 Folge-InPos / PosReg
0
5 S_fehl
6 PosReg1
7 PosReg2
8 PosReg3
9 PosReg4
10 PosReg5
11 24 VDC
12 I/O-GND
Description
Digital input
Digital input
Digital input
Digital input
Digital input
Digital input
Digital input
Digital input
Digital input
Digital input
Digital input
Digital input
Description
Digital input
Digital input
Digital output
Digital output
Digital output
Digital output
Digital output
Digital output
Digital output
Digital output
Supply voltage 24 VDC
Reference earth
167