Breaking Off The Metal Cover; Installing The Serial Connector - Fujitsu PRIMERGY TX1310 M3 Upgrade And Maintenance Manual

Serial connector

14.1.2 Breaking off the metal cover

Figure 106: Removing the serial connector metal cover
Ê Twist and break off the metal cover. Use a flat screw driver to break off the
metal cover.

14.1.3 Installing the serial connector

Ê Remove the two hexagon bolts from the serial connector.
Figure 107: Installing the serial connector (A)
Ê Insert the serial connector into the slot cover (1).
Ê Connect the cable to the system board "COM1" (2).
176 Upgrade and Maintenance Manual
TX1310 M3