Control Panel; Chassis Cover Installation/Removal - Fujitsu HX2560 M1 User Manual

Table of Contents

Advertisement

HX2560 M1/HX2560 M2 User's Manual

Control Panel

Note: The number of PCI slots available depend on the presence of GPUs in the server
model.
6-2
Control Panel
The control panel (located on the front of the chassis) connects to the serverboard to
provide you with system status indications.
The control panel LEDs inform you of system status. See "Chapter 3: System Interface" for
details on the LEDs and the control panel buttons.
6-3

Chassis Cover Installation/Removal

Dismount the server from the rack then remove/install the chassis cover.
Removing the chassis cover
1. Remove two screws on both sides securing the chassis cover to the chassis.
2. Slide the chassis cover backward.
3. Take off the chassis cover.
Figure 6-1. Chassis: Front and Rear Views
Drive Bays 0-9
Low-Profile PCI-E Slots
6-2
Standard Size PCI-E Slots

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hx2560 m2

Table of Contents