Overview Of Fixing Temperature Control; Standby Temperature Control - Canon imageRUNNER ADVANCE C3500 III Series Service Manual

Overview of Fixing Temperature Control

Fixing
temperature

■ Standby Temperature Control

This is a control to pre-heat the Fixing Assembly to reduce time to start printing.
• Flying Start
■ Print Temperature Control
This control is executed to increase a fixing temperature to the target level and keep it during printing.
• Startup (initial rotation) temperature control
• Initial rotation extension temperature control (only for media which size in width is wider than 300 mm)
• Print temperature control
• Paper interval temperature control
■ Down Sequence Control
This control is executed to prevent a fixing failure due to temperature increase at the edge or temperature decrease. When this
control is executed, throughput decreases.
• Down sequence when small-size paper is fed
• Down sequence when using paper of mixed sizes and types
Standby Temperature Control
Fixing
temperature
STBY INTR
Startup
(warm-up
Flying start
rotation)
control
control
temperature
temperature
Command for Command for
flying start print start
STBY INTR
Flaying start
control
temperature
Command for
Command for
flying start
print start
PRNT
Sheet-t
During-print
o-sheet
control
control
temperature
temperature
PRNT
93
2. Technology
Time
Time