9100c
3.13 Electrical safety tests
3-24
M1207027
Reproduced from the electronic master in MATRIX
Make sure the system is completely assembled and all accessory
devices are connected to electrical outlets.
1. Connect an approved test device (e.g. UL, CSA, or AAMI) and
verify that the leakage current is less than:
Voltage
100/120 VAC
220/240 VAC
2. Make sure that the resistance to ground is less than 0.2
between an exposed metal surface and the ground pin on the
power cord.
004
MANUAL−DOC, Technical Reference Manual, Technical Reference Manual for 9100c, English
Max. Leakage Current
300 Amps
500 Amps
M1207026