Additional Data For Tools - Siemens SINUMERIK 840D sl Operating Manual

Icons in the tool list
Icon /
Identification
Type
Red "X"
Yellow triangle
7.2.1

Additional data for tools

Certain tool types require geometry data than are not included in the list form of the tool list.
You can use the configuration file to specify the data to be displayed for specific tool types in
the "Additional data" window.
References
For a description of configuration options, refer to the
HMI sl / SINUMERIK 840D sl commissioning manual
Proceed as follows
HMI sl Universal
Operating Manual, 11/2006, 6FC5398-6AP10-1BA0
Description
The tool is disabled.
The prewarning limit has been reached.
Machine manufacturer
Please also refer to the machine manufacturer's instructions.
1. Select the "Parameter" operating area.
2. Press the "Tool list" softkey.
3. Press the "Further data" softkey.
The "Additional data" window opens.
The "Further data" softkey is only active if a tool for which the
"Additional data" window is configured is selected.
Tool management
7.2 Tool list
109