Manage tools
13.5 Tool list
Icon/
Marking
Green frame
Magazine/location number
Green double arrow
Gray double arrow
Red cross
Procedure
13.5.2
Additional data
The following tool type requires geometry data that is not included in the tool list display.
Tool types with additional geometry data
Tool type
710 3D-probe
712 Mono-probe
713 L-probe
264
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1.
Select the "Parameter" operating area.
2.
Press the "Tool list" softkey.
The "Tool List" window opens.
Meaning
The tool is preselected.
The magazine location is positioned at the change po‐
sition.
The magazine location is positioned at the load position.
The magazine location is disabled.
Additional parameters
Geometry length (length X, length Y, length Z)
Wear length (Δ length X, Δ length Y, Δ length Z)
Adapter length (length X, length Y, length Z)
Geometry length (length X, length Y, length Z)
Wear length (Δ length X, Δ length Y, Δ length Z)
Adapter length (length X, length Y, length Z)
Offset angle (angle)
Geometry length (length X, length Y, length Z)
Wear length (Δ length X, Δ length Y, Δ length Z)
Adapter length (length X, length Y, length Z)
Offset angle (angle)
Boom length (length)
Operating Manual, 05/2017, A5E40869190
Grinding