Authorized Managers - HP 10Base-T Hub 24M Manual

Authorized Managers

Attribute
Screen Name
Menu
Function
Common Use
Browser Interface Window
Browser Interface Tab
Default Setting
The Authorized Managers Screen enables you to specify the management
stations that can manage the hub or all devices in your network. You can
configure a list of up to 10 network management stations.
You must configure the Authorized Managers first before you can receive any
traps. Once set, it does not have to be set again unless you perform a Factory
Reset.
The columns of information in the Authorized Managers Screen are shown here.
Associated Community Name. Indicates the Community Name of the
hub for which you are creating an authorized manager.
Manager IP or IPX Address. Indicates the network address of the manage-
ment station you want to assign to be the authorized manager for the hub.
IP Security Mask. Indicates the security mask of the hub for which you
are creating an authorized manager. The security mask is a value that
reveals the extent to which the address of the authorized manager needs
to be explicit for manager entry to the hub. For example, a security mask
of 255.255.255.251 applied to an address of 15.47.66.40 to disallow values
of 15.47.66.46, 15.47.66.47, 15.47.66.48, and 15.47.66.49. HP recommends
you use a security mask value of 255.255.255.255.
Description
Authorized Managers
Management Access Configuration
Enables you to specify the management stations that can
manage the hub or all devices in your network.
Launching any second-level menu available from the console.
None
None
• Management Station: The IP Address of the management
station you are currently using to access the Hub Console
Interface.
• Community Name: Public
Configuration Reference
6-41