Mitsubishi Electric MELSERVO-JN Series Instruction Manual page 61

3. SIGNALS AND WIRING
(3) Connection method
(a) Inserting the wires directly to the terminals
Insert the wire to the very end of the hole while pressing the button by a tool such as a small flat-blade
screwdriver.
Tools such as a small
flat-blade screwdriver
(b) Putting the wires together using a ferrule
Insert the wire as the uneven side of the crimped ferrule collar faces the button side.
Ferrule for one wire or
solid wire
Use a ferrule for two wires when inserting two wires into one hole.
Button
Twisted wire
Ferrule for two wires
3 - 12