Mitsubishi Electric MELSERVO-JN Series Instruction Manual page 122

4. PARAMETERS
No. Symbol
PB13 NH1 Machine resonance suppression filter 1
Set the notch frequency of the machine resonance suppression filter 1.
Executing one-touch tuning automatically changes this parameter.
When parameter No. PB01 is set to "
parameter is ignored.
PB14 NHQ1 Notch shape selection 1
Used to select the machine resonance suppression filter 1.
Executing one-touch tuning automatically changes this parameter.
When parameter No. PB01 is set to "
parameter is ignored.
PB15 NH2 Machine resonance suppression filter 2
Set the notch frequency of the machine resonance suppression filter
2.
Set parameter No. PB16 (notch shape selection 2) to "
make this parameter valid.
Executing one-touch tuning automatically changes this parameter.
PB16 NHQ2 Notch shape selection 2
Select the shape of the machine resonance suppression filter 2.
Executing one-touch tuning automatically changes this parameter.
Name and function
0
Notch depth selection
Depth Gain
Setting
0 Deep 40dB
1 14dB
to
2 8dB
3 Shallow 4dB
Notch width selection
Width
Setting
0 Standard 2
1 3
to
2 4
3 Wide 5
Machine resonance suppression filter 2 selection
0: Invalid
1: Valid
Notch depth selection
Setting
Depth Gain
0 Deep
40dB
1 14dB
to
2 8dB
3 Shallow 4dB
Notch width selection
Setting
Width
0 Standard 2
1 3
to
2 4
3 Wide 5
0", the setting of this
0", the setting of this
1" to
4 - 25
Initial Setting
Unit
value range
Position
4500 30 Hz
to
4500
000h Refer to
name
and
function
column.
4500 30 Hz
to
4500
000h Refer to
name
and
function
column.
Control mode
Internal Internal
speed torque