Mitsubishi Electric MELSERVO-JN Series Instruction Manual page 304

12. SERVO MOTOR
12. SERVO MOTOR
12.1 Introduction
12.1.1 Rating plate
The following shows an example of the rating plate for explanation of each item.
Model
Input power, rated current,
rated output
Mass, insulation class
Rated speed
Induced voltage constant,
maximum ambient temperature
Power factor, IP rating
Serial number (Note 1)
Country of origin,
conforming standards
Manufacturer
Note 1 Production year and month of the servo motor are indicated in a serial number on the rating plate.
The year and month are indicated by the last two digits of the year and one digit of the month [1 to 9, X (10), Y (11), and Z
(12)].
For January 2012, the Serial No. is like, "SER. _ _ _ _ _ _ _ _ _ 121".
2 Products approved by Certification Bodies are marked. The marks depends on the Certification Bodies.
12.1.2 Parts identification
Refer to section 11.1 for details of the cables and connectors.
Power cable (Note 1,2)
Power lead (U, V, W)
Earth lead
Servo motor shaft
Note 1. The encoder cable and the power supply cable are options.
2. An electromagnetic brake cable is separately required for the servo motor with an
electromagnetic brake.
(Note 2)
Encoder cable (Note 1)
Encoder
12 - 1
MSIP-REI-MEK-BSM0010000000A