Mitsubishi Electric MELSERVO-JN Series Instruction Manual page 473

Revision Date *Manual Number
Feb., 2011 SH(NA)030086ENG-B
Section 8.1
Section 8.2
Section 8.3
Section 9.1 (1)
Section 9.1 (2)
Section 10.1
Section 10.2
Section 10.3
Section 10.3.1
Section 10.3.2
Section 10.5
Section 11.1.1
Section 11.1.2
Section 11.2
Section 11.2 (5)
Section 11.3
Section 11.4
Section 11.5 (1)
Section 11.5 (2)
Section 11.6
Section 11.7
Revision
A.90 Home position return incomplete warning
A.96 Home position setting warning
A.97 Program operation disabled
A.98 Software limit warning
Warning list is partially changed.
Partially changed.
Following alarm contents are added.
Detailed display 32.1 Overcurrent was detected by the
hardware detection circuit (during operation)
Detailed display 37.3 Point table setting range error
Detailed display 39.1 Program error
Detailed display 39.2 Command argument range error
Detailed display 39.3 Incompatible command
Detailed display 61.1 Auxiliary function setting error
Partially changed.
Following warning contents are added.
Detailed display 90.1 Home position return incompletion
Detailed display 90.2 Home position return abnormal
completion
Detailed display 96.1 In-position not reached
Detailed display 96.2 Speed command not converged
Detailed display 97.1 Program operation disabled
Detailed display 98.1 Reached the software limit at the
forward rotation
Detailed display 98.2 Reached the software limit at the
reverse rotation side
MR-JN-10A1 and MR-JN-20A1 are added.
Partially changed.
MR-JN-10A1 and MR-JN-20A1 are added.
Partially changed.
MR-JN-10A1 and MR-JN-20A1 are added.
Partially changed.
POINT is partially changed.
Partially changed.
MR-JN-10A1 and MR-JN-20A1 are added.
Partially changed.
Inrush current of MR-JN-10A1/20A1 is added.
Partially changed.
Partially changed.
MR-JN-10A1 and MR-JN-20A1 are added.
Outline dimension drawings of MR-RB12 and MR-RB032 are
changed.
Partially changed.
POINT is added.
Partially added and changed.
MR-JN-10A1 and MR-JN-20A1 are added.
Partially changed.
Note 2 is partially changed.
MR-JN-10A1 and MR-JN-20A1 are added.