Point Table Mode Setting Screen Sequence ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ - Mitsubishi Electric MELSERVO-JN Series Instruction Manual

5. DISPLAY AND OPERATION SECTIONS
5.6.2 Point table mode setting screen sequence
In the point table mode, pressing the "SET" button changes the screen as shown below.
Press the "UP" or the "DOWN" button to move to the next screen.
Position data
Servo motor speed
Acceleration time
constant
UP
Deceleration time
constant
Dwell
Auxiliary function
5 - 14
DOWN