Orienting And Securing The Robot - ABB IRB 7600 Series Product Manual

2.5.7 Orienting and securing the robot

General
This section details how to orient and secure the robot to the base plate in order
to run the robot safely.
Illustration, robot fitted to base plate
This illustration shows the robot base fitted to the base plate.
xx0100000107
A
B
C
D
Attachment screws
The table below specifies the type of securing screws and washers to be used for
securing the robot to the base plate/foundation.
Suitable screws, lightly lubricated:
Quality:
Suitable washer:
Tightening torque:
Product manual - IRB 7600
3HAC022033-001 Revision: V
Robot attachment bolts and washers, 12 pcs (M24 x 140)
Orienting grooves in the robot base and in the base plate
Levelling screws
Base plate attachment screws
© Copyright 2007 - 2018 ABB. All rights reserved.
2 Installation and commissioning
2.5.7 Orienting and securing the robot
M24 x 140
Quality 8.8
Thickness: 4 mm
Outer diameter: 44 mm
Inner diameter: 25 mm
725 Nm
Continues on next page
85