ABB IRB 7600 Series Product Manual page 74

2 Installation and commissioning
2.5.2 Lifting robot with lifting slings
Continued
D
E
F
I
L
Required equipment
Equipment
Lifting accessory, robot
Slings attached directly onto robot
This section details how to lift and move the robot using lifting slings when these
are attached directly onto the robot frame.
1
2
3
4
5
6
74
Chain
M12 lifting eye
Eye for lifting accessory
Lifting slings, 4 pcs
Hook
Article number
3HAC15607-1
Action
Run the overhead crane to a position above
the robot.
Position the robot as detailed in enclosed in-
struction!
Fit the lifting accessory to the robot as de-
scribed in the enclosed instruction!
CAUTION
The IRB 7600 robot weighs 2500 kg.
All lifting accessories used must be sized ac-
cordingly!
WARNING
Personnel must not, under any circumstances,
be present under the suspended load!
Raise overhead crane to lift the robot.
© Copyright 2007 - 2018 ABB. All rights reserved.
Note
Includes user instructions 3HAC15971-2
Note
Article number is specified in
equipment on page 74.
Release the brakes, if required, as de-
tailed in section Manually releasing the
brakes on page 77.
Article number is specified in
equipment on page 74.
Make sure all hooks and attachments
maintain their correct positions while
lifting the robot!
Always move the robot at very low
speeds, making sure it does not tip.
Product manual - IRB 7600
3HAC022033-001 Revision: V
Required
Required