Restoring The Balancing Device Using A Hydraulic Press Tool - ABB IRB 7600 Series Product Manual

4 Repair

4.5.4.3 Restoring the balancing device using a hydraulic press tool

4.5.4.3 Restoring the balancing device using a hydraulic press tool
Overview
This section details how to restore the balancing device and how to remove the
press tool from the device.
Press tool and hydraulic cylinder
The figure below shows the hydraulic cylinder mounted on the press tool.
The press tool includes two press devices that are used to different models of the
balancing device.
xx0200000174
A
B
C
D
E
Continues on next page
310
DANGER
There is a high tensioned spring inside the balancing device, incorrect handling
may cause injuries and damage property.
Press block
Hydraulic cylinder
Press device
Bolt, press device
Moving pin with marking
© Copyright 2007 - 2018 ABB. All rights reserved.
Product manual - IRB 7600
3HAC022033-001 Revision: V