ABB IRB 7600 Series Product Manual page 97

Cooling fan
The details of the cooling fan are shown in the figure below.
xx0500002158
A
B
C
D
Required equipment
Equipment
Cooling fan
Cabling cooling fan, axes 1
or 2.
Plate for customer connec-
tions
Additional cabling to and in-
side the controller
Material set fan axes 1 and
2
Product manual - IRB 7600
3HAC022033-001 Revision: V
2.5.11 Installation of cooling fan for motors (option)
Fanbox
Attachment screws, fanbox plates (9 pcs)
Groove in the connector
Tightening screws, fanbox (3 pcs)
Article number
3HAC15374-1
3HAC023599-001
3HAC025778-001
-
3HAC023999-001
© Copyright 2007 - 2018 ABB. All rights reserved.
2 Installation and commissioning
Note
Choose this cabling if equipping the robot
with cooling fans on axis 1 or 2.
An additional connection plate must be
fitted to the robot base, if not already in-
stalled. The plate is shown in the figure
Plate for customer connections, at base
on page 98.
Specified in section
cables, robot base to controller (option)
on page 127.
The set includes:
• fan axes 1 & 2 cable harness
• plate, customer
• attachment screws and nuts.
Continues on next page
Continued
Position switch
97