Configuring Global Vprn Parameters; Configuring Router Interfaces - Alcatel-Lucent 7705 Service Manual

Configuring Global VPRN Parameters

Refer to
VPRN parameters.
The autonomous system (AS) number is configured in the config>router>bgp context.
A spoke SDP can be bound to the VPRN service using the auto-bind command or the
spoke-sdp sdp-id command. However, when using the spoke-sdp command, you
must create a spoke SDP for each peer PE router.
A VPRN spoke SDP can be any of the supported SDPs, except the IP SDP.
The following example displays a VPRN service with configured parameters.
*A:ALU-1>config>service# info
----------------------------------------------
...
...
----------------------------------------------
*A:ALU-1>config>service#

Configuring Router Interfaces

Refer to the 7705 SAR OS Router Configuration Guide for command descriptions and
syntax information to configure router interfaces.
The following example displays a router interface configuration:
ALU48>config>router# info
#------------------------------------------
echo "IP Configuration"
#------------------------------------------
...
7705 SAR OS Services Guide
VPRN Services Command Reference on page 439
vprn 1 customer 1 create
vrf-import "vrfImpPolCust1"
vrf-export "vrfExpPolCust1"
router-id 2000
route-distinguisher 10001:1
spoke-sdp 2 create
exit
no shutdown
exit
interface "if1"
address 2.2.2.1/24
port 1/1/33
exit
interface "if2"
address 10.49.1.46/24
port 1/1/34
exit
VPRN Services
for the CLI syntax to configure
Page 429