Alcatel-Lucent 7705 Service Manual page 121

ETH-CFM Configuration Commands
eth-cfm
Syntax eth-cfm
Context config
Description This command enables the context to configure Connectivity Fault Management (CFM) parameters
for 802.1ag and Y.1731 standards.
domain
Syntax domain md-index [format {dns | mac | none | string}] [name md-name] level level
domain md-index
no domain md-index
Context config>eth-cfm
Description This command configures CFM domain parameters.
The dns, mac, and string keywords apply to dot1ag. The none keyword applies to Y.1731. Using the
none keyword means that the
associated with domain format none and association format icc-based is a Y.1731 MEP; otherwise,
the MEP is a dot1ag MEP.
The no form of the command removes the MD index parameters from the configuration.
Parameters md-index — specifies the Maintenance Domain (MD) index value
format {dns | mac | none | string} — specifies a value that represents the type (format) of the md-
7705 SAR OS Services Guide
association
Values
1 to 4294967295
name
Values dns: specifies the DNS name format
mac: X:X:X:X:X:X-u
X: [0 to FF] hex
u: [0 to 65535] decimal
none: no name specified (the domain represents a Y.1731 MEG, not a dot1ag
domain)
string: specifies an ASCII string
Default string
command must use the icc-based format. A MEP
Services Overview
Page 121