Alcatel-Lucent 7705 Service Manual page 365

port-id — specifies the physical port ID in the slot/mda/port format
bundle-id — specifies the multilink bundle to be associated with this IP interface. The bundle
create — keyword used to create a SAP instance. The create keyword requirement can be
ingress
Syntax ingress
Context config>service>ies>interface>sap
Description
This command enables access to the context to associate ingress filter policies with the SAP.
If an ingress filter is not defined, no filtering is performed.
7705 SAR OS Services Guide
Values sap-id:
If the card in the slot has a T1/E1 ASAP Adapter card installed, the port-id must be in the
slot_number/MDA_number/port_number format. For example 1/2/3 specifies port 3 on MDA 2
in slot 1.
The port-id must reference a valid port type. When the port-id parameter represents TDM
channels, the port ID must include the channel ID. A period "." separates the physical port from
the channel-id. The port must be configured as an access port.
keyword must be entered at the beginning of the parameter. The command syntax must be
configured as follows:
bundle-id:
bundle-id value range:
For example:
*A:ALU-12>config# port bundle-ppp-5/1.1
*A:ALU-12>config>port# multilink-bundle
enabled/disabled in the environment>create context.
atm [port-id][:vpi/vci | vpi]
IMA group [bundle-id][:vpi/vci | vpi]
port-id slot/mda/port[.channel]
bundle-type-slot/mda.bundle-num
bundle keyword
type ima
bundle-num 1 to 10
vpi NNI 0 to 4095
UNI 0 to 255
vci 1, 2, 5 to 65535
bundle-type-slot-id/mda-slot.bundle-num
1 to 10
Internet Enhanced Service
Page 365