Alcatel-Lucent 7705 Service Manual page 262

VLL Services Command Reference
endpoint-name — specifies the name of the service endpoint
no-endpoint — removes a spoke SDP association
spoke-sdp
Syntax spoke-sdp sdp-id:vc-id [vc-type {ether | vlan}] [create] [no-endpoint]
spoke-sdp sdp-id:vc-id [vc-type {ether | vlan}] [create] endpoint endpoint-name
no spoke-sdp sdp-id:vc-id
Context config>service>epipe
Description
This command binds an Epipe service to an existing Service Destination Point (SDP). The syntax for
an Apipe, Cpipe, or Ipipe spoke SDP has additional parameters. See
Apipe, Cpipe, or Ipipe syntax.
A spoke SDP is treated as the equivalent of a traditional bridge "port" where flooded traffic received
on the spoke SDP is replicated on all other "ports" (other spoke SDPs or SAPs) and not transmitted on
the port on which it was received.
The SDP has an operational state that determines the operational state of the SDP within the service.
For example, if the SDP is administratively or operationally down, the SDP for the service will be
down.
The SDP must already be defined in the config>service>sdp context in order to associate an SDP
with an Epipe service. If the sdp sdp-id is not already configured, an error message is generated. If the
sdp-id does exist, a binding between that sdp-id and the service is created.
SDPs must be explicitly associated and bound to a service. If an SDP is not bound to a service, no
far-end 7705 SAR devices can participate in the service.
The endpoint command allows multiple spoke SDPs to be associated with the endpoint, providing
PW redundancy capability. The endpoint must already be defined in the config>service>epipe
context in order to associate multiple spoke SDPs with the endpoint.
The no form of this command removes the SDP binding from the service. The SDP configuration is
not affected; only the binding of the SDP to a service. Once removed, no packets are forwarded to the
far-end router.
Default no sdp-id is bound to a service
Parameters sdp-id — uniquely identifies the SDP
vc-id — identifies the virtual circuit
Page 262
Values 1 to 17407
Values 1 to 4294967295
spoke-sdp on page 261
7705 SAR OS Services Guide
for the