Alcatel-Lucent 7705 Service Manual page 255

priority
Syntax priority priority-value
no priority
Context config>service>epipe>sap>eth-cfm>mep>ais-enable
Description This command specifies the priority of AIS messages originated by the MEP, which is used for
priority-mapping OAM frames.
Parameters
priority-value — specifies the priority value of the AIS messages originated by the node
ccm-enable
Syntax [no] ccm-enable
Context config>service>epipe>sap>eth-cfm>mep
config>service>epipe>spoke-sdp>eth-cfm>mep
Description
This command enables the generation of CCM messages.
The no form of the command disables the generation of CCM messages.
ccm-ltm-priority
Syntax ccm-ltm-priority priority
no ccm-ltm-priority
Context config>service>epipe>sap>eth-cfm>mep
config>service>epipe>spoke-sdp>eth-cfm>mep
Description This command specifies the priority value for Continuity Check messages (CCMs) and linktrace
messages (LTMs) transmitted by the MEP.
The default priority is 7, which means that CCM frames map to the NC forwarding class by default.
The no form of the command removes the priority value from the configuration.
Default 7
Parameters priority — specifies the priority of CCM and LTM messages
7705 SAR OS Services Guide
Values
0 to 7
Default
7
Values 0 to 7
VLL Services
Page 255