Alcatel-Lucent 7705 Service Manual page 278

VLL Services Command Reference
Label
I. Fwd. Octs.
I. Dro. Octs.
E. Fwd. Pkts.
E. Fwd. Octets
Eth-Cfm Configuration Information
Md-index
Direction
Ma-index
Admin
MepId
CCM-Enable
LowestDefectPri
HighestDefect
Defect Flags
Mac Address
CcmLtmPriority
CcmTx
CcmSequenceErr
DmrRepliesTx
LmrRepliesTx
Dual-Loss Test
Dual-Loss Thresh
Eth-Ais
Eth-Ais Rx Ais
Page 278
Table 34: Show Service-ID All Command Output Fields (Continued)
Description
Specifies the number of forwarded ingress octets
Specifies the number of dropped ingress octets
Specifies the number of forwarded egress packets
Specifies the number of forwarded egress octets
Displays the value of the MD index
Displays the direction of the MEP
Displays the value of the MA index
Displays the administrative state of the MEP (enabled or
disabled)
Displays the MEP-ID
Displays the status of the Continuity Check Message (CCM)
Displays a configured value that defects are evaluated against
Displays the highest defect
Indicates the defect flags
Displays the MAC address (the MAC address for a spoke SDP
is the system MAC address; for a SAP, it is the port MAC
address)
Displays the priority of the CCM Linktrace Message (LTM)
Displays the number of CCM transmissions
Displays the number of CCM sequence errors
Displays the number of delay measurement replies transmitted
Displays the number of loss measurement replies transmitted
Displays the status of the dual-ended loss measurement test
(enabled or disabled)
Displays the frame error threshold beyond which an alarm will
be raised. The threshold is expressed as a percentage.
Displays the status of the ETH-AIS test (enabled or disabled)
Indicates whether any ETH-AIS messages have been received
7705 SAR OS Services Guide