Alcatel-Lucent 7705 Service Manual page 363

bfd
Syntax bfd transmit-interval [receive receive-interval] [multiplier multiplier]
no bfd
Context config>service>ies>interface
Description This command configures the time interval in which BFD control messages are transmitted and
received on the interface. The multiplier parameter specifies the number of consecutive BFD
messages that must be missed by the peer node before the BFD session closes and the upper layer
protocols (OSPF, IS-IS, BGP) are notified of the fault.
no bfd
Parameters transmit-interval — the number of milliseconds between consecutive BFD sent messages
receive-interval — the number of milliseconds between consecutive BFD received messages
multiplier — the number of consecutive BFD messages that must be missed before the interface is
ip-mtu
Syntax ip-mtu octets
no ip-mtu
Context config>service>ies>interface
Description This command configures the IP maximum transmit unit (packet size) for this interface.
The no form of the command returns the default value.
Parameters octets — the MTU for the interface
7705 SAR OS Services Guide
Values 100 to 100000
Default
100
Values
100 to 100000
Default
100
brought down
Values 3 to 20
Default 3
Values 512 to 2048
Internet Enhanced Service
Page 363