Alcatel-Lucent 7705 Service Manual page 397

arp
Syntax arp [ip-address] | [mac ieee-address] | sap sap-id] | [interface ip-int-name]
Context show>service>id
Description This command displays the ARP table for the IES instance.
Parameters ip-address — the IP address for which ARP entries will be displayed
ieee-address — the 48-bit MAC address for which ARP entries will be displayed. The MAC address
sap-id — the SAP ID for which ARP entries will be displayed
ip-int-name — the interface name for which ARP entries will be displayed
Output
The following output is an example of service ID ARP information, and
fields.
Sample Output
*A:ALU-2# show service id 4 arp
===============================================================================
ARP Table
===============================================================================
IP Address
-------------------------------------------------------------------------------
3.2.3.3
===============================================================================
*A:ALU-2#
7705 SAR OS Services Guide
Default all IP addresses
can be expressed in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff, where aa, bb, cc, dd, ee, and
ff are hexadecimal numbers.
Default
all MAC addresses
Values sap-id: null
dot1q
atm
port-id
bundle-type-slot/mda.bundle-num
qtag1
vpi
vci
MAC Address
[port-id | bundle-id]
[port-id | bundle-id]:qtag1
[port-id | bundle-id][:vpi/vci |vpi |vpi1.vpi2]
slot/mda/port[.channel]
bundle keyword
type ppp
bundle-num 1 to 10
0 to 4094
NNI 0 to 4095
UNI 0 to 255
1, 2, 5 to 65535
Type Expiry Interface
Other 00h00m00s to Internet
Internet Enhanced Service
Table 48
describes the
SAP
n/a
Page 397