Creating A Cpipe Service; Configuring Cpipe Sap Parameters - Alcatel-Lucent 7705 Service Manual

Configuring VLL Components

Creating a Cpipe Service

Use the following CLI syntax to create a Cpipe service.
CLI Syntax: config>service# cpipe service-id [customer customer-id]
[create] [vpn vpn-id] [vc-type {satop-e1 | satop-t1 | cesopsn |
cesopsn-cas}] [vc-switching]
Example:
cesopsn
The following example displays the Cpipe service creation output for PE Router 1
(ALU-41).
A:ALU-41>config>service# info
-------------------------------------
...
...
-------------------------------------
A:ALU-41>config>service#

Configuring Cpipe SAP parameters

Use the following CLI syntax to configure Cpipe SAP parameters. For ingress and egress
configuration information, see
217.
CLI Syntax: config>service# cpipe service-id [customer customer-id]
[create] [vpn vpn-id] [vc-type {satop-e1 | satop-t1 | cesopsn |
cesopsn-cas}] [vc-switching]
Page 204
description description-string
service-mtu octets
no shutdown
config>service# cpipe 234 customer 123 create vc-type
config>service>cpipe# description "cpipe test"
config>service>cpipe# service-mtu 1400
config>service>cpipe# no shutdown
config>service>cpipe#
cpipe 234 customer 123 create
description "cpipe test"
service-mtu 1400
no shutdown
exit
sap sap-id [create]
cem
[no] packet
[no] report-alarm [stray] [malformed] [pktloss]
Configuring Ingress and Egress SAP Parameters on page
jitter-buffer value | payload-size value
payload-size value
7705 SAR OS Services Guide