Table 45: Port And Encapsulation Values - Alcatel-Lucent 7705 Service Manual

create — keyword used to create a SAP instance. The create keyword requirement can be
accounting-policy
Syntax accounting-policy acct-policy-id
no accounting-policy [acct-policy-id]
Context config>service>ies>sap
Description This command creates the accounting policy context that can be applied to a SAP. An accounting
policy must be defined before it can be associated with a SAP. If the policy ID does not exist, an error
message is generated.
A maximum of one accounting policy can be associated with a SAP at one time. Accounting policies
are configured in the config>log context.
The no form of this command removes the accounting policy association from the SAP, and the
accounting policy reverts to the default.
Default no accounting-policy
Parameters acct-policy-id — the accounting policy ID as configured in the config>log>accounting-policy
7705 SAR OS Services Guide
The values depend on the encapsulation type configured for the interface.
allowed values for the port and encapsulation types.

Table 45: Port and Encapsulation Values

Port Encap-
Type Type
Ethernet Null
Ethernet Dot1q
enabled/disabled in the environment>create context.
context
Values 1 to 99
Allowed Comments
Values
— The SAP is identified by the port.
0 to 4094 The SAP is identified by the 802.1q tag on the
port. Note that a 0 qtag1 value also accepts
untagged packets on the dot1q port.
Internet Enhanced Service
Table 45
describes the
Page 385