Common Configuration Tasks - Alcatel-Lucent 7705 Service Manual

Common Configuration Tasks

This section provides a brief overview of the tasks that must be performed to configure a
VPRN service and provides the CLI commands.
7705 SAR OS Services Guide
4. Define BGP parameters and enable BGP in the config>router>bgp context.
To configure BGP for the router, refer to the "BGP" section in the 7705 SAR OS
Routing Protocols Guide.
5. Associate a VPRN service with a customer ID.
6. Define a route distinguisher (RD) (mandatory).
7. Set the auto-bind parameter. Alternatively, define a VPRN spoke SDP.
When using the spoke SDP command, you must enter the command for each peer
PE router.
8. Define VRF route-target associations or VRF import/export policies.
9. Create a VPRN interface.
10. Define SAP parameters on the VPRN interface:
→ select node(s) and port(s)
→ optional - select QoS policies other than the default (configured in
config>qos context)
→ optional - select filter policies (configured in config>filter context)
→ optional - select accounting policy (configured in config>log context)
→ optional - configure DHCP features
11. Enable the service.
VPRN Services
Page 427